DFM Marine – Seztec USA

DFM Marine

DFM Marine is installed in fuel line of the engine / boiler / burner, directly measures fuel consumption and generates an output signal, which is sent to telematics unit (GPS tracker).

  • Overview
  • Technical Data
  • Downloads
  • Benefits

DFM Marine is used in telematics systems (GPS tracking systems) and as an autonomous fuel monitoring solution.

Measuring chamber is made of corrosion-proof and highly durable material – brass.

Body and fuel line connections of DFM Marine can be made of duralumin (lighweight and inexpensive) or brass (corrosion-proof and more durable). Fuel line connection types – thread or flange – specified in purchase order.

Any two units of DFM Marine are configured from PC to operate in paired mode, without a need of selecting and calibrating two compatible pieces. Differential fuel consumption measurement mode is used for measuring consumption of fuel in supply and return fuel lines of an engine, if necessary.

Nominal diameter (inch) 1/2 - 3/4 - 1
Flow rate ranges 0.01 to 4 m3/h
Maximum inaccuracy ±0.5%
Measurement chamber material Brass
Body and connection materials duralumin (A models); brass (L models)
Type of connection to fuel line Flange or Thread
Ingress protection rating IP54
Maximum pressure of working fluid 16 Bar or 25 Bar
Maximum temperature of working fluid +95°C (optional +150°C)
Interface CAN Bus

› Fuel consumption optimization
› Fuel misuse and theft detection
› Fuel consumption monitoring
› Engine testing for fuel consumption
› Machine hours monitoring