The S10F ultrasonic water meter is designed for measurement of cold & hot water consumption for residential, commercial, and industrial applications.
The S10F ultrasonic water meter is designed for high-precision measurement of flow and heating/cooling energy consumption at industrial, residential, and commercial facilities.
The flow sensor is constructed out of 316 stainless steel to offer impeccable performance, corrosion resistance, and resistance against pitting especially in hot water applications. For larger meter sizes i.e. DN200 and up, it is possible to order dual sensor pairs to offer redundancy and uninterrupted operation in case the first pair of ultrasonic sensors fail.
SEMPAL S10F ultrasonic water meter measures volume, mass, temperature and excess pressure of the coolant – water and other liquids with solid particles less than 200 μm in size and not more than 500 mg of dry residue per liter of liquid.
Nominal Diameter DN | 20-1200mm |
Flowrate Range | 0.6 - 50,000 m3/h |
Medium Temperature Range | 0-150 DegC |
Nominal Pressure PN | 16-25Bar |
Power Supply | 24 VAC/ 36VAC / 220VAC |
Material (Flow Tube & Flanges) | Stainless Steel |
Body Material | Aluminium |
Accuracy Class | OIML R49 Class 1 or 2 |
Outputs | RS485, RS232, M-Bus |
– Hot and cold water metering with automatic switching between modes
– Hourly archive memory: 100 days, daily archive memory: 3 years
– Protection against unauthorized access
– Measurement in both directions of flow
– Built-in self-diagnostic system able to archive information about errors
– Data collection directly to USB flash drive or to AMR system