Seztec HD2® handheld aggregate moisture meter suitable for sand, gravel and crushed stone. Measure sand/aggregate moisture and temperature.
Seztec HD2® portable aggregate moisture meter measures moisture content (%) and temperature directly in your sand or aggregate stockpiles.
Suitable for all construction aggregates, including sand, gravel, crushed stone, grit and other fine aggregates up to 1 -1/4″ size. Control your product quality on-site!
Our moisture sensors utilize patented TRIME® TDR technology that creates a strong measuring field which penetrates deep into a large volume of material, resulting in highly accurate and repeatable moisture measurement values. Seztec’s handheld and online moisture probes and over 20-years of expertise meet all your aggregate and fresh concrete measurement needs.
It’s important to determine the moisture content of aggregate prior to mixing, because it helps determine the precise quantity of water needed for the mix to achieve the desired water/cement ratio (w/c ratio).
The HD2® Hand-Held Aggregate Moisture Meter overcomes the challenges posed by the traditional moisture measurement techniques such as oven-drying or kiln drying – none of which are consistent or accurate. The drying methods utilize a small testing sample (around 500g) and provide results in 30-40 minutes. This method is vastly affected by the stone size as even one larger stone in the test sample can throw off your results by as much as 10-20%!
With the HD2® device, the QC officer or site engineer can obtain moisture readings of construction aggregates in under 5 seconds directly on-site! The meter measures three most important parameters – moisture (%), temperature and conductivity. Furthermore the device automatically averages out consecutive readings to minimize measurement error.
› Moisture measurement of construction aggregates in stockpiles
› Concrete production
› Asphalt production
› Ready-mix industry
› Pre-cast industry
› On-site testing
› Suitable for minerals and conductive bulk materials (with SONO M1C probe)
› Accurate moisture measurement in two seconds
› Display individual and average readings
› Easy-to-use menu
› Lightweight and durable aluminum body
› Factory calibrated for 15 materials by type, density, and particle size
› Long battery life for hundreds of measurements
› HD2 Handheld device
› SONO-M1 Moisture Probe
› Charger, Product Manual
› Carrying Case
Portable Sand Moisture Meter | Sturdy Body | High Accuracy | HD2®
Product Name | HD2 Portable Aggregate Moisture Meter |
Materials | All construction aggregates, such as various types of sand, gravel, crushed stone, grit, etc. |
Application | Material moisture, temperature (integrated sensor), and conductivity |
Measurements per Charge | ca. 5000 |
Connectable Sensors | All IMKO aggregate & soil moisture probes such as SONO-XX and PICO-XX probes. |
Operating Temperature | -20°C up to 70°C |
Data Logger | Built-in logger displays previous consecutive 6 measurement. |
Moisture Measuring Range | 0..100% volumetric water content |
Temperature Measuring Range | -15°C up to 50°C |
Accuracy (in % volumetric water content) | ±0.2% |
Repeatabiltiy | ±0.3% |
Calibration | Customizable material specific calibration storage of up to 15 user defined calibration curves; calibration of dialectric permittivity is possible |
Conductivity Range | Deployable up to 5dS/m; Total Conductivity (Optional probe SONO M1C can handle up to 12dS/m). |
Ingress Protection (probe body) | Waterproof sealed PVC IP68 (NEMA 6P) |
› Extremely robust and stable – German Made!
› Powerful battery for hundreds of measurements
› Easy to use with one hand via four buttons
› High reliability even under challenging conditions
› Based on superior radar technology
› Measure the water content precisely to material saturation
› Display of measuring value within two seconds
› Robust and watertight structure
› PC connectivity for programming and data downloads
› Delivery with a resistant hard shell case